Baader SCT T-Adaptor Ultrashort
The ingenious two-piece design allows you to adjust the orientation of your equipment before you fully thread in the SCT adapter.
This item is part 'B' of item #2958500 - NX4 universal photo adapter.
It has a female SCT 2"x24TPI thread on one side and a standard male T / T2 thread on the other side, it can be used on its own to adapt your standard SCT scope to receive T-2 accessories.
The short length will allow you to couple items that until this point were not generally used together, for example you are now able to pair the Alan Gee Telecompressor MKII (#2454400) with the Baader/Zeiss Giant Binocular Viewer (#2456410) providing incredible large-aperture wide field binocular viewing at f/5.9
When purchased as set #2958500 - NX4 (C90) universal photo adapter (which comprises parts 'A' and 'B' - see below), it converts your MAK telescopes 1.375"x24TPI rear cell into a standard T / T-2 thread and all Baaders extremely useful T-2 adapter system can then be attached to your MAK.
Please note: This item is not for use on its own with MAK threaded scopes. The design Specification on some of the Scopes listed have changed over time, and you must ensure that the thread sizes mentioned are applicable to your scope prior to purchasing this accessory.
Adapters for spotting scopes terrestrial astronomy telescopesDownload (1.62M)
Click here to leave a review