Imaging Cameras & Accessories

Designed for serious Astro-Imagers. Optimised for the Evostar-72ED PRO, this superb quality accessory effectively reduces the telescope’s focal length by a factor of 0.85x and provides much improved field-edge correction. Supplied with thumbscrew fit adaptor. Use in conjunction with Sky-watcher’s M48 Canon or Nikon T-ring adaptors (product codes 20237 & 20238).

Morpheus® Adapter to convert the Morpheus M43 male top-thread into a SP54 male thread – without adding onto the optical height

• For Ultima 65 Spotting Scope
• Screw thread attachment
• With case

• M48 Compatible with Reducer/Correctors for Evostar 80/100/120/150ED models
• Allows Easy 360° Rotation of the Camera for Image Framing 
• Allows use of Standard 2” Filters
• Anti-Slip Security Thread
• Anodised Aluminium

An optically-matched M48-fitting doublet field flattener for Skywatcher's Esprit 150 ED PRO triplet refractor. 

The M48 fitting provides a large clear aperture to reduce halation and a precision thread ensures the triplet and doublet lens groups are precisely aligned on the optical axis perpendicular to the image.

You have your new telescope and have observed Saturn and Jupiter. Now you're ready to take the next step and start imaging them. But where do you begin? The Celestron NexImage 10 Solar System Imager is the perfect solution.

The Opticron Universal Smartphone Mount is a simple and flexible way to connect your smartphone to selected eyepieces and take high magnification photos and video. Your eyepiece must have a diameter of between 40.5-51mm to be compatible.

The Baader Mark-III Coma Corrector is the long awaited replacement for the highly regarded Baader MPCC Coma Corrector. The most noticeable change is a newly designed lens system optimised for f-ratios f3.5 to f6 (the original MPCC was designed for an f/ratio of f4 to f6).

• Attaches directly to the rear cell of the larger Edge optical tubes
• Produces better illumination for today's larger full-frame imaging sensors, all the way to the corners
• Reduces vignetting–darkening around the edges of the image sensor–by providing unobstructed light to the camera

A heavy-duty tripod with 1.75" diameter stainless steel legs and a centre bolt connector with 3/8" tripod thread, complete with accessory tray

Extends from 83.5cm to 115cm. Compatible with the Sky-Watcher 21.5cm extension tube 20313

Can be used to upgrade the standard aluminium tripod supplied with the AZ5, AZ PRONTO, AZ-GTi, & AZ-EQ AVANT mount/telescope models, providing much greater stability