Mounts & Accessories

This flashable Celestron NexStar hand control (HC) is compatible with NexStar SE and CPC GPS series computerized telescopes.

This is NOT the current NexStar + hand controller! If you are replacing a Nexstar + HC you must buy another + HC & not this.

You are likely to need the firmware reflashing with this HC connected to your mount. See this link for details

This flashable Celestron NexStar hand control is compatible with Advanced VX, CG5-GT, CGEM and CGE Pro series computerized telescopes.

This is NOT the new "NexStar+" hand controller!

• NexStar+ Hand Control is compatible with all altazimuth (AZ) NexStar telescopes.
• Flash upgradeable via the Internet; latest updates can be found at Celestron.com.
• 40,000-object database.
• Dual line, 16-character LCD screen with adjustable backlighting.
• RS-232 connection for computer control.

• The Celestron RS-232 Cable connects your computerized telescope to a laptop or PC for control via various planetarium software programs.
• The Celestron NexStar RS-232 Cable is also necessary for flash upgrades to hand control software.
• Cable is 62 inches long.
• Requires a Serial-to-USB Adapter (#18775) if your computer does not have a serial port.

• A piggyback ride for your camera. Let your telescope do the driving while your camera takes beautiful wide-angle images of the sky
• Attaches easily to the top rear of any SCT in minutes

• Attach a variety of accessories to your CGEM or CGE-style mount with this Universal Mounting Plate.
• Several different mounting holes to choose from to mount rings, spotting scopes, cameras, etc.
• Approximately 14 inches long.

• Attach a variety of accessories to your Vixen, Advanced CG-5 or Advanced VX mount with this Universal Mounting Plate.
• Several different mounting holes to choose from to mount rings, spotting scopes, cameras, etc.
• Approximately 10 inches long.

The SKYTEE-2 is a heavy duty alt-azimuth mount capable of holding two telescope tubes of up to 15Kg each in parallel. A Skywatcher/Vixen type dovetail saddle plate is included on each side of the mount. Precise manual slow motion controls are provided on each axis.

This battery operated LED illuminator easily attaches to the exit hole of the polar axis bore of Skywatcher EQ3-2 and EQ5 and Celestron CG-5 and AVX Equatorial Mounts.

Provides illumination to the polarscope reticule. A useful aid to the polar alignment procedure.

Adjustable light intensity & Includes 1x CR2032 battery

With Multi-Speed Handset and ST4 Autoguider Interface

Accepts Sky-Watcher tube rings and allows small telescopes to be connected to a photographic tripod via a standard ¼-20 tripod bush.

Slow motion cable set 13cm/19cm, compatible with the EQ3-2 mount.

This handset cable allows the SkyWatcher SynScan handset to connect to the EQ6 Pro equatorial mount. Please note this cable will only suit the above and is not supplied as standard with handsets.
Coily cable with correct fittings for EQ6 PRO - please note image may differ from the cable supplied

Choose from the options on the right side

EQ3-2 Counterweight will fit any equatorial mount with a 20mm counterweight shaft - Including the Celestron CG-4

Choose from the options on the right

High quality made dual fit saddle plate for EQ6 mounts.

20290 - Simply install this new saddle in place of your existing saddle and you will have both vixen and losmandy fits. Well made saddle by Skywatcher.

Please note item may differ slightly from illustration.