Other Accessories

• Enables automatic alignment of your Celestron computerized telescope*
• No need to identify or locate any star in the sky–StarSense automatically aligns your telescope, so you can begin observing in minutes
• Aligns in 3 minutes or less
• Provides advanced mount modeling—align on numerous stars throughout the sky for extremely precise GoTo pointing accuracy
• StarSense hand controller included

This will connect your AZ-EQ6 or AZ-EQ5 to your Cars 12v DC power socket or your power supply

A replacement for the original cable supplied with the AZ-EQ6 AZ-EQ5 mount.

A CGE Dovetail Bar to fit 11" SCT and EdgeHD telescopes. The CGE fit is a standard size for higher end mounts and is compatible with Celestron CGEM, CGEM DX and CGE Pro mounts as well as mounts from other manufacturers.

The HM5 Polar axis finder scope is a very useful accessory for EQ3-2 Sky-Watcher equatorial mounts. It speeds up and refines the polar alignment procedure so the observer can spend more valuable time observing, rather than setting up.

Used for Star Adventurer & To replace standard Canon cable already supplied with Allview mount.

For Pentax K-7 K10D K20D

For Canon EOS 60D, 60Da, 70D, 77D, 80D, 100D, 200D, 300D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 750D, 760D, 800D, 1000D, 1100D, 1200D, 1300D

Canon EOS mirrorless cameras EOS M5, M6

This is the new Illuminator to replace the old light source of the Microguide eyepiece #2404300

The new red Log-Pot Illuminator has a very wide (Logarythmic) range of brightness control.

Will also fit Celestron RACI finderscopes, though will only go in 1.5 turns.

Sold in pairs

Choose Model From Scroll Down Menu - on the right

Some rods may be of equal length. 7.5mm inside-diameter (approx)

Otherwise: EQ3-2 - 13cm & 19cm. EQ2 29cm & 33cm. EQ2-5/AZ3 All fit each other but lengths vary.

Automatically align your computerized Sky-Watcher mount with StarSense.

No need to identify or locate any star in the sky – StarSense will automatically align your telescope, so you can begin observing in minutes. Plug and play compatibility (see compatibility list).

The HM5 Polar axis finder scope is a very useful accessory for EQ-5 Sky-Watcher equatorial mounts. It speeds up and refines the polar alignment procedure so the observer can spend more valuable time observing, rather than setting up.

Used for Star Adventurer

Also To replace standard Canon cable already supplied with Allview mount

For NIKON D3, D3S, D3X, D200, D300, D300S & D700

Upgrade for the standard cast tube rings and 45mm dovetail bar supplied with the Evostar-150ED. Constructed from machined aluminium with an anodised finish. Overall weight 2.1kg.

Choose from the options on the right

High quality made dual fit saddle plate for EQ6 mounts.

20290 - Simply install this new saddle in place of your existing saddle and you will have both vixen and losmandy fits. Well made saddle by Skywatcher.

Please note item may differ slightly from illustration.

Used for Star Adventurer

Also To replace standard Canon cable already supplied with Allview mount

For SONY a100, a200, a300, a350, a550, a700, a900 and MINOLTA a7 Digital, aSweet S, a807si, a-9, a-7, Dimage-7Hi, Dimage-7i

The very sturdy EQ5 Equatorial mount provides excellent precision and stability and a host of other useful features for the serious astronomer.

The mount rests firmly on a large, adjustable stainless steel pipe tripod with accessory tray. Supplied complete with a bubble level, latitude adjuster with micrometer scale and an azimuth polar-alignment adjuster.

Constructed from cast aluminium. 215mm overall length. Base and top platform diameter 70mm. Female 3/8" thread on base. Male threaded 3/8" screw connector on top platform (top platform separable from main body).